Overview
기본정보
모델 번호. | 원통형 배터리 셀 용접 |
전도성 방식 | 양면 |
용접 지점 번호 | 더블 |
유형 | 특별한 |
기계 | 자동_양면_18650 리튬 배터리 팩 |
운송 패키지 | 나무 케이스 |
사양 | 자동_양면_18650 리튬 배터리 팩 |
등록 상표 | KEEPLEADER 자동_양면_18650 리튬 |
기원 | 심천자동_양면_18650 리튬배터리 |
제품 설명
원통형 배터리 셀 자동 용접 DC 스폿 용접기_양면_18650 리튬 배터리 팩 인버터_저항 용접기
01: 매개변수
02: 신청
원통형 배터리 셀 용접 DC 스폿 용접기는 자동 X, Y 축 공급 지수로 구성된 양면에서 18650 배터리 팩 탭 용접에 주로 사용되며 조정 가능한 전력 스케일은 분할 시트 및 투영 지점을 기준으로 0.3mm 내에서 다양한 용접 두께를 변경할 수 있습니다. DC 스폿 용접기는 이중 펄스 용접을 채택하고 첫 번째 펄스는 배터리 표면 코팅 및 산화물 제거에 사용되며 용접 전극의 접촉 위치가 약간 변형되어 유효 접촉 면적이 향상되고 두 번째 펄스는 온톨로지 금속 용접에 사용됩니다. , 용접 품질을 효과적으로 향상시키고 용접 스패터를 줄일 수 있습니다.
제품 설명
원통형 배터리 셀 용접 DC 스폿 용접기
01: 매개변수
모델 | KLM-500 |
추진력 | 500w (용접력 제외) |
X축 | 520mm (20개 18650, 16개 26650) |
Y축 | 320mm |
최대 로딩 | 200개 18650 |
용인 | 0.05mm |
전원공급장치 | 220v±10%, 50Hz±10% |
운전 전류 | 6A (용접력 제외) |
용접 전류 | 9950A |
에어 튜브 | 내경 6mm, 외경 8mm |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Cylindrical Battery Cell Welding DC Spot Welder construct X, Y auto feeding mechanism of servo-motor indexing, that drive the cylindrical cell plate to localize the bonding position after precise alignment, spot welding process can automatically complete the cylinder batteries tap spot welding in array and roll line feeding, this dual pulse,programmable logic control, capacitors discharged spot welder of automatic feeding is used for 18650, 21700,26650,32650,32700 cylinder battery pack automatic spot welding, it can weld both side simultaneously with high speed and prominent effect and the highly automated human-machine interface make it easy to operate it, it can be used in electric tool battery, torsion car battery, energy storage battery pack, scooter electric vehicle battery and etc, the operation and debugging very easy and convenient, design of components built-in makes appearance more concise